Wireless Professional Gen 2 Single Input Pulse Counter Sensor


  • Part #:RFP-0246-2
  • Weight:105g
  • Availability: Inquire

Price: $141.75
Price: $191.36


Description

Scigiene’s Wireless Gen 2 Pulse Counter can be integrated with up to four, dry contact or mechanical switch and closure devices to count the number of actuations occurring within a given time frame for each input.  Scigiene's wireless sensors are ideal for pharmaceutical, medical and other high tech applications where loss of data is unacceptable.   These also have an amazing range of over 1000 ft. with 10 year battery life and can be remotely upgraded via network connections. These are truly the most advanced wireless sensors available.

Features:

  • Wireless range of 1,200+ feet through 12+ walls
  • Frequency-Hopping Spread Spectrum (FHSS)
  • Improved interference immunity
  • Improved power management for longer battery life (12+ years on AA batteries)
  • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
  • Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle): 10-minute heartbeats = ~ 22 days, 2-hour heartbeats = ~ 266 days
  • Over-the-air updates (future proof)

Specifications:

Pulse Counter

Maximum count

1.84467 * 10^19 (64-bit number)

Input voltage

0 to 15 Volts DC

Cable construction

High impedance (2-wire), 3 ft length

Counter operation

Positive and/or negative edge pulses

Input Impedance

> 2.4 MOhm +/- 1%

Compatibility

Open collector NPN switches (passive)

Mechanical switches (passive)

0-15V driven source (active)1

Max input pulse rate/min pulse width with passive input2

 

Max Pulse Rate2

Min Pulse Width3

No Filter

~ 2 KHz

~ 0.5 ms

4 Hz Filter

~ 4 Hz

~ 250 ms

40 Hz Filter

~ 40 Hz

~ 25 ms

Lead

Cable length

Standard: 0.3 m (1 ft)

Wire count

2-conductor (red/black)

Wire gauge

22 AWG

Conductor material

Stranded Copper 7/30

Insultation

PVC, 0.010"

Shield

No

Jacket

PVC (black)

Overall Diameter

4.2 mm (0.164")

Ratings / Approvals

NEC (UL) Type CM, UL AWM Style 2464, CSA AWM FT4, RoHS/Reach Compliant

Temperature Rating

-20°C to 85°C (-4°F to 185°F)4

Voltage Rating

300 V Max

Dielectric Strength

1500 V RMS

Gen 2  Wireless

Data logging

Sensor logs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through power cycling): 10-minute Heartbeats = ~22 days - 2-hour Heartbeats = ~266 days

Wireless protocol

Gen 2 Proprietary Frequency-Hopping Spread Spectrum (FHSS)

Wireless transmission power (EIRP)

50 mW (900MHz), 25 mW (868 MHz), 10 mW (433 MHz)

Wireless range

2,000+ ft. through 18+ walls with the Gen 2 XL® Gateway

Security

Encrypt-RF ® (256-bit key exchange and AES-128 CTR)

General

Battery voltage range

2.0 to 3.8 VDC

Operating altitude (non-pressurized environments)

-15.2 to 1,982 m (-50 to 6,500 ft)5

Storage altitude (non-pressurized environments)

-15.2 to 3,048 m (-50 to 10,000 ft)5

Operating humidity

5 to 85% RH (non-condensing)

Certifications

900 MHz sensors: FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1.

1. Low Pulse: 0 Volts to 0.2 * VBatt, High Pulse: 0.8 * VBatt to 15 Volts.

2. High pulse count rates can impact battery life. AA battery-powered sensors are recommended if counting pulses faster than 1x per second.

3. The input pulse rate must be less than the specified max pulse rate and the input pulse width must be greater than the specified min pulse width to ensure the input pulse is counted.

4. Temperatures colder than the rating are acceptable if the cable is not moving or vibrating.

5. Operating and storage altitude without DC power supply is -30.48 to 9144 m (-100 to 30000 ft).

Additional Information

* Hardware cannot withstand negative voltage. Take care when connecting a power device.

** At temperatures above 100°C, it is possible for the board circuitry to lose programmed memory.

*** Low Pulse: 0 Volts to 0.2 * VBatt, High Pulse: 0.8 * VBatt to 15 Volts.

**** High pulse count rates can impact battery life. AA battery powered sensors are recommended if counting pulses faster than 1x per second.

***** Input pulse rate must be less than specified Max Pulse Rate and input pulse width must be greater than specified Min Pulse Width to ensure the input pulse is counted.

Technical Information

Required Accessories

Scigiene 21 CFR Part 11 Premiere is a secure cloud based monitoring and notification software dedica (more...)

Part #: RFR-0539-2
$519.75 (USD)
$701.66 (CAD)
The Scigiene GEN 2 4G Industrial Cellular Gateway allows you to control GEN 2 Wireless Sensor settin (more...)

Part #: RFR-0538-2
$404.25 (USD)
$545.74 (CAD)
The Scigiene GEN 2 4G Cellular Gateway allows you to control GEN 2 Wireless Sensor settings without (more...)

Part #: RFR-0526-2
$231.00 (USD)
$311.85 (CAD)
The Gen 2 Ethernet Gateway allows your RF Wireless Sensors to communicate with the Scigiene Premier (more...)

Part #: RFR-0529-2
$288.75 (USD)
$389.81 (CAD)
The GEN2 Modbus Gateway acts as a data concentrator for Scigiene’s GEN 2 long range wireless sensor (more...)