Wireless Gen 2 Serial Modbus Gateway


  • Part #:RFR-0529-2
  • Weight:16 oz
  • Dimensions:179.603 x 90.678 x 41.30 mm
  • Availability: Inquire

Price: $288.75
Price: $389.81


Description

The GEN2 Modbus Gateway acts as a data concentrator for Scigiene’s GEN 2 long range wireless sensor networks. This device allows you to connect up to 50 wireless sensing devices, per gateway, to your existing serial Modbus RS-232C and RS-485 sensing and control infrastructures.

Scigiene has recognized the importance of using open standards like Modbus, allowing GEN 2 wireless sensors to be used in the majority of industrial applications. Modbus is often used to connect a supervisory computer with a remote terminal unit (RTU) in supervisory control and data acquisition (SCADA) systems. Modbus allows for communication between many (approximately 247) devices connected to the same wired network. Therefore, our GEN2 Modbus Gateway allows for seemingly unlimited wireless expansion to a traditional wired network. 

Features:

  • Wireless range of 1,200+ feet through 12-14 walls *
  • 900 MHz Frequency Hopping Spread Spectrum (FHSS), 868 and 433 MHz Frequency Agile
  • Improved interference immunity
  • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
  • 16,000 sensor message memory
  • Over the air updates (future proof)
  • Communicates with Modbus RTU / ASCII Serial Protocols
  • Supports RS-232C / RS-485 Interfacing
  • LED Status Indicators
  • NEMA 4X / IP65 Rated Enclosure
  • RP SMA Antenna Connector (Antenna Included)

*Actual range may vary depending on environment.

Specifications:

GEN 2 Serial Modbus Gateway Specifications

Wireless

Wireless Range

1,200+ ft. non-line-sight*

Security

Encrypt-RF (256-bit key exchange and AES-128 CTR)

Scigiene Radio Support

GEN 2 Wireless Module by Scigiene

Frequencies: 900, 868 and 433 MHz

Antenna

Connector: SMA

Gain: 5.0 dBi Standard

Certifications 

900 MHz product; FCC ID: ZTL- G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz

product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02),

EN 300 220-2 V3.1.1 (2017-02) and EN 60950.

3 Wire Communication Interface

RS-232C

TXD (OUT), RXD (IN), and Ground / Common

RS-485

D+, D-, and Ground / Common

Protocol Selector

Jumper for RS-232 and RS485

Power

Input Voltage Range

4.5 - 36.0 VDC **

Minimum Current Required

100mA (500mA Recommended)

Environmental

Operating Temperature

-40°C to +85°C (-40°F to 185°F) ***

Storage Temperature

-40°C to +85°C (-40°F to 185°F)

Mechanical

LEDs

Wireless Activity, Wired Activity, System Status

Reset Feature

Communication / Factory Settings Reset Jumper

Enclosure

Durable, Impact-Resistant UV Stabilized Polycarbonate

(IP65 of IEC 529 and NEMA 1, 2, 4, 4x, 12 and 13 Rated)

Dimensions

179.603 x 90.678 x 41.30 mm

Weight

16 ounces


































*Actual range may vary depending on environment.

**Hardware cannot withstand negative voltage. Please take care when connecting a power device.

***At temperatures above 100°C, it is possible for the board circuitry to lose programmed memory.



Part #DescriptionPrice (US)
RFR-0529-2Gen 2 Modbus GatewayCall for Pricing
RFR-0529-2-ULGen 2 Modbus Gateway WITH unlock codeCall for Pricing

Required Accessories

Scigiene 21 CFR Part 11 Premiere is a secure cloud based monitoring and notification software dedica (more...)

Optional Accessories

Part #: RFI-0230-2
$199.50 (USD)
$269.33 (CAD)
Scigiene's Industrial Wireless Gen 2 Temperature sensors use a thermistor to accurately measure temp (more...)

Part #: RFI-0245-2
$210.00 (USD)
$283.50 (CAD)
Scigiene's Industrial Wireless Gen 2 Temperature sensors use a thermistor to accurately measure temp (more...)

Part #: RFI-0229-2
$220.50 (USD)
$297.68 (CAD)
Scigiene's Industrial Wireless Gen 2 high temperature sensor use an RTD to accurately measure temper (more...)

Part #: RFI-0226-2
$252.00 (USD)
$340.20 (CAD)
Scigiene's Industrial Wireless Gen 2 low temperature sensors use an RTD to accurately measure temper (more...)

Part #: RFI-0227-2
$236.25 (USD)
$318.94 (CAD)
Scigiene's Industrial Wireless Gen 2 Duct Temperature Sensor uses an NTC type thermistor with UL lis (more...)

Part #: RFI-0228-2
$183.75 (USD)
$248.06 (CAD)
Scigiene's Industrial Wireless Gen 2 Water Temperature sensor use a 3 foot external water sealed sen (more...)

Part #: RFI-0232-2
$241.50 (USD)
$326.03 (CAD)
Scigiene's Industrial Wireless Gen 2 humidity sensors allow you to monitor the relative humidity of (more...)

Part #: RFI-0233-2
$225.75 (USD)
$304.76 (CAD)
Scigiene's Industrial Wireless Gen 2 voltage meters are capable of measuring the voltage off another (more...)

Part #: RFI-0253-2
$252.00 (USD)
$340.20 (CAD)
Scigiene's Industrial Wireless Gen 2 AC Current Meters measure the RMS current of an alternating cur (more...)

Part #: RFI-0254-2
$278.25 (USD)
$375.64 (CAD)
Scigiene's Industrial Wireless Gen 2 AC Current Meters measure the RMS current of an alternating cur (more...)

Part #: RFI-0274-2
$330.75 (USD)
$446.51 (CAD)
Scigiene's Industrial Wireless Gen 2 Water Rope Sensor detects conductive liquids anywhere along the (more...)