Industrial Gen 2 Accelerometer Impact Detection Sensor activates when g-forces are exceeded by a user defined threshold – up to 8 g-force. The user can key in the desired threshold for the g-force trigger. This sensor has two operation modes that can be also selected by the user: High Performance and Low Power. High Performance has an output data rate of 800 Hz with the High Pass Filter cut off at 16 Hz while the Low Power has an output data rate of 12.5 Hz with the High Pass Filter cut off at 0.25 Hz. The data is displayed as “Force Detected” or “No Force Detected”.
Features:
Specifications:
|
Supply voltage |
2.0-3.8 VDC
(3.0-3.8 VDC using power supply) |
|
|
Current consumption |
0.2 µA (sleep
mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), 2.5 mA (MCU active), 5.5 mA
(radio RX mode), 22.6 mA (radio TX mode) |
|
|
Operating
temperature range (board circuitry and battery) |
-40°C to +85°C
(-40°F to +185°F) |
|
|
Included battery |
Max temperature
range |
-40° to +85°C
(-40° to +185°F) |
|
Capacity |
1500 mAh |
|
|
Optional solar
feature |
Solar panel |
5VDC/30mA (53mm x
30mm) |
|
Charging
temperature range |
0° to 45°C (32°
to 113°F) |
|
|
Max temperature
range |
20° to 60°C (-4°
to 140°F) |
|
|
Included rechargeable
battery |
600 mAh/>2000
charge cycles (80% of initial capacity) |
|
|
Solar efficiency |
Optimized for
high and low-light operation |
|
|
Integrated memory |
Up to 3200 sensor
messages |
|
|
Weight |
4.7 ounces |
|
|
Enclosure rating |
NEMA 1, 2, 4, 4x,
12 and 13 rated, sealed and weather proof |
|
|
UL rating |
UL Listed to
UL508-4x specifications (File E194432) |
|
|
Certifications |
900 MHz product;
FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. |
|
