The WM-Sensor series provides the best high accuracy and great temperature
stability for room comfort, and it is dedicated to wall mounted applications. They
convert the measured values into linear 4 to 20 mA signals and optional 0 to 10
Vdc output can also be offered under request. The microprocessor based circuit
enables full configuration of output range when used with the TxConfig PC
interface and the Windows® based software.
Features and Specifications:
- Accuracy: 0.5 °C @ 25 °C
- Repetibility: ±0.1 °C
- Range: programmable between -50 and 120 °C
(please check operational limits)
- Response Time: up to 30s in fairly still air
- Operational limits: 20 to +65 °C, 0 to 95% RH
Note: When measuring temperatures higher than +65
°C or lower than -20 °C, only 50% of the probe total length must be inserted
into the measured environment
Power: | 12 to 30 Vdc (model 4-20 mA)
18 to 30 Vdc (model 0-10 V) |
Cable input:
| PG7 cable gland
|
Output:
| Two-wire loop powered 4-20 mA or 20-4 mA
Voltage output: 0-10 Vdc or 10-0 Vdc (optional) |
Output resolution:
| 0.006 mA (4-20 mA) 0.003 V (0-10 Vcc) |
Output load (RL):
| Model 4-20 mA: RL (max. in Ohms) = (Vdc - 12) / 0.02; where: Vdc=power voltage in Volts Model 0-10 Vdc: 10 kOhms minimum |
Ingress Protection:
| Electronic module case: IP65 Sensor probe: IP40 |
- Internal protection against reversed voltage
wire polarity
- No electrical isolation between input, output
and power circuits