GF2 Humimeter - Building Moisture Meter for Building Surveyors


  • Part #:HM-13744
  • Weight:265g
  • Availability: Inquire

Price: $1,169.26
Price: $1,636.96


Description

The Humimeter GF2 building moisture meter in this configuration can make the tasks and everyday work of a building surveyor easier.  This product can be used to determine the water content in floors, insulating materials and brickwork. It can be used to accurately estimate how long the drying process will take.  Check if your plaster, wood or parquet have reached the correct water content.  Furthermore you are able to measure the air humidity or the surface temperature with an infrared sensor that is included in the package.  If the air quality is necessary for your work, you can determine the CO2 content easily with the pluggable CO2 sensor.

Sensors included in the package:

Features and Specifications:

  • Measurements are given within seconds without prior treatment of samples
  • Hold function, manual saving of results, datalogging for 10,000 logs with measuring point report
  • Large, well-lit LCD display
  • PC software for data archiving and graphic display of climate data
  • Universal building moisture meter, that is customizable according to individual requirements
  • Resolution: 0.1% water content
  • Measuring range air humidity 0-100 % R.H.
  • Automatic temperature compensation
  • Infrared temperature measurement -25°C to +125°C / -13°F to 257°F
  • Infrared optics, 1:10
  • Measurement of CO2 up to 5000ppm  

Required Accessories

Part #: HM-13141
$143.12 (USD)
$200.37 (CAD)
Attached conductance electronics for GF2 pluggable electronics box with 1 meter cable for connecting (more...)

Part #: HM-12847
$97.58 (USD)
$136.61 (CAD)
Measures moisture content in plaster to determine if it is ready to have work done on it such as til (more...)

Part #: HM-12630
$312.26 (USD)
$437.16 (CAD)
Checks the moisture content in drying wood, parquet etc. in order to prevent the formation of shrink (more...)

Part #: HM-13011
$109.29 (USD)
$153.01 (CAD)
Pair of plug-in electrodes for determination of water content of hardened and set building materials (more...)

Part #: HM-13012
$195.16 (USD)
$273.22 (CAD)
Measures condensation and water damages in: insulation material, and residual moisture in impact sou (more...)

Part #: HM-12514
$234.20 (USD)
$327.88 (CAD)
Relative humidity sensor. Air humidity: 0 to 100%. Temperature: -10 to +60°C.Connector of an ext (more...)

Part #: HM-12032
$338.28 (USD)
$473.59 (CAD)
FLH Humidity and temperature sensor with 2 meter connecting cable, High Accuracy hand held RH probe with 2 meter cable

Part #: HM-13159
$377.32 (USD)
$528.25 (CAD)
With this sensor the relative humidity and the temperature in brickwork can be measured. The sensor (more...)

Part #: HM-12513
$123.60 (USD)
$173.04 (CAD)
Pluggable Infrared temperature sensor. Temperature: -25 to 125°C. Infrared optics: 1:10. With this (more...)

Optional Accessories

humimeter USB data interface module with LogMemorizer measuring data recording and analyzing softwar (more...)

Part #: HM-11929
$84.57 (USD)
$118.40 (CAD)
This optional Plastic case can be used for any model of the: BLW, WLW, BL2 and GF2 humimeter series.

Set of 20 replacement tips for GF2 and BLW Humimeter measuring electrodes, without insulation 40mm long

Part #: HM-11775
$22.12 (USD)
$30.97 (CAD)
HM-12146 is an optional accessory that can be ordered with the GF2 humimeter device. The set of 20 (more...)

Part #: HM-11482
$28.62 (USD)
$40.07 (CAD)
Set of 2 replacement tips for measuring electrodes, insulated, 60mm long

Part #: HM-12881
$58.55 (USD)
$81.97 (CAD)
BNC connecting cable 4mm , 100cm length - spare part (included in HM-13141)

Part #: HM-13224
$136.61 (USD)
$191.25 (CAD)
8 meter Extension Cable for RH2 humimeter

Part #: HM-13160
$109.29 (USD)
$153.01 (CAD)
Set of measuring bushes for floor screed: Plastic bush for driving in a bore hole of a diameter of (more...)

Part #: HM-13051
$41.64 (USD)
$58.30 (CAD)
Wall Mount / Anti-theft Device GF2