Wireless Industrial Gen 2 Pulse Counter Sensor - Single Input


  • Part #:RFI-0246-2
  • Weight:4.7 oz
  • Availability: Inquire

Price: $220.50
Price: $297.68


Description

Scigiene's Industrial Wireless Gen 2 pulse counters can be integrated with up to four, dry contact or mechanical switch and closure devices to count the number of actuations occurring within a given time frame for each input.

Features:

  • Wireless range of 1,200+ feet through 12+ walls *
  • Frequency-Hopping Spread Spectrum (FHSS)
  • Improved interference immunity
  • Improved power management for longer battery life ** (12+ years on AA batteries)
  • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
  • Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle): 10-minute heartbeats = ~ 22 days, 2-hour heartbeats = ~ 266 days
  • Over-the-air updates (future proof)

* Actual range may vary depending on environment

** Battery life is determined by sensor reporting frequency and other variables

Specifications:

Supply voltage

2.0–3.8 VDC (3.0–3.8 VDC using power supply) *

Current consumption

0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode)

Operating temperature range (board circuitry and battery)

-40°C to +85°C (-40°F to +185°F)

Included battery

Max temperature range

-40° to +85°C (-40° to +185°F)

Capacity

1500 mAh

Optional solar feature

Solar panel

5VDC/30mA (53mm x 30mm)

Charging temperature range

0° to 45°C (32° to 113°F)

Max temperature range

-20° to 60°C (-4° to 140°F)

Included rechargeable battery

600 mAh/>2000 charge cycles (80% of initial capacity)

Solar efficiency

Optimized for high and low-light operation ***

Charging efficiency

5%**

Luminous sustainability

Minimum of 10,000 LUX **

Maximum count

4294967296 (32 bit number)

Input voltage

0 to 15 Volts DC

Detection wires

High impedance (2-wire), 3 ft length

Counter operation

Positive and/or negative edge pulses

Compatibility

Open collector NPN switches (passive), mechanical switches (passive), 0–15V driven source (active) ****

Max input pulse rate/min pulse width with passive input *****

 

Max Pulse Rate

Min Pulse Width******

No Filter

~ 2 KHz

~ 0.5 ms

4 Hz Filter

~ 4 Hz

~ 250 ms

40 Hz Filter

~ 40 Hz

~ 25 ms

Enclosure rating

NEMA 1, 2, 4, 4x, 12 and 13 rated, sealed and weatherproof

UL rating

UL Listed to UL508-4x specifications (File E194432)

Certifications

900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1

* Hardware cannot withstand negative voltage. Take care when connecting a power device.

** Solar feature’s energy harvesting circuitry works indoors with low light.

*** Light present 25% of day yields 125% of operating power to support 10-minute heartbeats.

**** Low Pulse: 0 Volts to 0.2 * VBatt, High Pulse: 0.8 * VBatt to 15 Volts.

***** High pulse count rates can impact battery life. AA battery powered sensors are recommended if counting pulses faster than 1x per second.

****** Input pulse rate must be less than specified Max Pulse Rate and input pulse width must be greater than specified Min Pulse Width to ensure the input pulse is counted. 

Technical Information

Required Accessories

Scigiene 21 CFR Part 11 Premiere is a secure cloud based monitoring and notification software dedica (more...)

Part #: RFR-0539-2
$519.75 (USD)
$701.66 (CAD)
The Scigiene GEN 2 4G Industrial Cellular Gateway allows you to control GEN 2 Wireless Sensor settin (more...)

Part #: RFR-0538-2
$404.25 (USD)
$545.74 (CAD)
The Scigiene GEN 2 4G Cellular Gateway allows you to control GEN 2 Wireless Sensor settings without (more...)

Part #: RFR-0526-2
$231.00 (USD)
$311.85 (CAD)
The Gen 2 Ethernet Gateway allows your RF Wireless Sensors to communicate with the Scigiene Premier (more...)

Part #: RFR-0529-2
$288.75 (USD)
$389.81 (CAD)
The GEN2 Modbus Gateway acts as a data concentrator for Scigiene’s GEN 2 long range wireless sensor (more...)