This Basic Gen2 900MHz Water Temperature Sensor uses a NTC type thermistor probe with 3' lead wires to measure water temperature. The wireless sensor is best used for water/liquid storage tanks, manufacturing processes, swimming pools and aquariums. Can be easily installed and mounted for long term use.
Features:
Specifications:
|
Power |
Replaceable 3.0V (CR2032) Coin Cell Battery |
|
Supply Voltage |
2.0-3.8 VDC*** |
|
Operating Temperature Range (board circuitry and
coin cell) |
-7° to +60°C (+20° to +140°F) |
|
Optimal Battery Temperature Range (coin cell) |
+10°C to +50°C (+50°F to +122°F) |
|
Probe Temperature Range |
-40°C to +100°C (-40°F to +212°F) |
|
Accuracy |
+/- 1°C (1.8°F) - Can be calibrated to +/- 0.25°C
by Scigiene |
|
Lead wire length |
3 ft (36 in) with Water Tight Seal * |
|
Integrated Memory |
Up to 3200 Sensor Messages |
|
Dimensions |
1.125” x 2.0” x 0.875” |
|
**
While the wire leads and thermistor have a water tight seal, the electronics
housing (RF portion) is not sealed for wet environments or outdoor use. If
needed, we recommend using Monnit industrial water temperature sensors. |
|
* Actual range may vary depending on environment
** Battery life is determined by sensor reporting frequency and other variables
*** Hardware cannot withstand negative voltage. Please take care when connecting a power device.
**** While the wire leads and thermistor have a water tight seal, the electronics housing (RF portion) is not sealed for wet environments or outdoor
use. If needed, we recommend using Monnit industrial water temperature sensors.
