Coli Coliform / Chromatic^TM Salmonella Dipslide is a ready-to-use device with two different media coated onto a plastic support used for the microbial monitoring of surfaces of sanitary importance and analysis of food and water samples. The chromogenic and selective media allow the detection of Salmonella spp and the differentiation of E. coli from the other enterobacteria.

TEST PROCEDURE

1. Take a slide from the refrigerator and leave it at ambient temperature for about 5 minutes.
2. Unscrew and extract the slide from its cylindrical container. Avoid any contact with the agar surface.
3. For surface monitoring, flex the cap forming a 90° angle and press each side of the slide firmly against the surface to be examined for 10 seconds. Alternatively, use a swab for sampling the area, afterwards roll the swab gently over the agar surface. For examination of liquids, hold the slide by the cap and immerse it completely into the test fluid.
4. Reinsert the slide into its tube, screw it tight and incubate at 35 ± 2°C for 18-24 hours.

RESULTS INTERPRETATION

After incubation observe the color and the morphology of the colonies and interpret the results as indicated in the ID table.

APPEARANCE

Chromatic^TM Coli Coliform Side 1: slightly opalescent, light amber.

Chromatic^TM Salmonella Side 2: clear, beige.

STORAGE CONDITIONS

2-8°C away from light, until the expiry date on the label. Eliminate if signs of deterioration or contamination are evident.

SHELF LIFE

4 months